Manufacturer: B-TEK

Drum Scale

Manufacturer: B-TEK

Drum Scale

Drum Scale Available For:

The B-TEK  Drum Scale is designed with a low-profile weighing surface. The deck height makes this scale ideal for use with pallet jacks, dollies, wheeled carts and
storage drums rolled on end. The scale is available in epoxy painted mild steel
and 304 stainless steel. The Drum Scale can be supplied with built-in or
detachable ramps, indicator column and wheeled portability kits. The simple,
robust design of the scale allows for adaptability in many different types of
industrial applications and environments.

Carbon Steel

  • NON-NTEP
  • Low profile above ground installation
  • Capacities from 1,000 lbs. to 2,500 lbs.
  • 1-1/2″ nominal deck height
  • 24″ x 24″ – 48″ x 48″ platform –
    custom sizes upon request
  • 1/4″ mild steel TREAD PLATE deck with live side
    rail design
  • Side access junction box location
  • Leveling foot adjustment holes in side rail
  • Cross-linked two-part Epoxy paint system
  • Plated alloy steel, 350 Ohms, 3.0mV/V load cells
  • B-TEK stainless steel ball encapsulated foot –
    2.5″ diameter base
  • NEMA 4 FRP junction box with signal trim summing card

Stainless
Steel

  • NON-NTEP
  • Low profile above ground installation
  • Capacities from 1,000 lbs. to 2,500 lbs.
  • 1-1/2″ nominal deck height
  • 24″ x 24″ – 48″ x 48″ platform –
    custom sizes upon request
  • 1/4″ 304 stainless steel SMOOTH deck with live
    side rail design
  • Side access junction box location
  • Leveling foot adjustment holes in side rail
  • Exposed surfaces are sand blasted to a clean,
    consistent appearance
  • Stainless steel (IP67), 350 Ohms, 3.0mV/V load cells
  • B-TEK stainless steel ball encapsulated foot –
    2.5″ diameter base
  • NEMA 4 FRP junction box with signal trim summing card

Contact our team of experts if your equipment needs repaired, replaced, or calibrated!

Call (800) 928-5005 or fill out the form below to get started.